Date: 02-26-2019 | |
Number of Hours: 12 | |
Manual Reference: no ref |
With the fasteners finally in some refining of the joins and fill is required.
First up was to reinforce the pod carriers and add wheels.
A couple of hours later and I can see these being used for a number of years while the pods are off the plane.
I added the usual micro fill to joins with plastic release on one side.
Pretty ugly at this stage.
Even more filler.
After a lot of sanding this is getting closer. The pods have some wax on them so they need to be sanded before primer. I’ve done a lot more since these photos. Fill and sand, fill and sand. Fortunately there is not a lot of filler that will remain. Its mainly the joins and a bit for the upper pylon layup joins. Nearly there.