Well after having the two tubes inserted I found there was just a little bit of flexing going on with those hatches. Not OK.

The next day I started adding a third line of tubes in the middle to address the problem. This was 4 or 5 days of cures again

Pic 3 shows after all the curing came many hours of sanding and grinding to tidy up all that micro. I wanted to remove all the excess and get it down to the minimum. Again to save weight… it was starting to look a little tidy too. Of course no one sees most of this as it will be on the underneath of the nose.

The third pin

Pins all the way

All sanded and tidy