• Home
  • Flying
    • First Flight
  • Build by Chapter
    • Ch 3 Education
    • Ch 4 Fuselage Bulkheads
    • Ch 5 Fuselage Sides
    • Ch 6 Fuselage Assembly
    • Ch 7 Fuselage Exterior
    • Ch 8 Roll Over/Seat Belts
    • Ch 9 Main Gear/Landing Brake
    • Ch 10 Canard
    • Ch 11 Elevators
    • Ch 12 Canard Installation
    • Ch 13 Nose and Nose Gear
    • Ch 14 CenterSection Spar
    • Ch 15 Firewall and Accessories
    • Ch 16 Control System
    • Ch 17 Roll/Pitch Trim System
    • Ch 18 Canopy
    • Ch 19 Wings, Alierons
    • Ch 20 Winglets/Rudders
    • Ch 21 Strakes โ€“ Fuel/Baggage
    • Ch 22 Electrical System
    • Ch 23 Engine Installation
    • Ch 24 Covers/Consoles
    • Ch 25 Finishing
    • Ch 26 Upholstry
  • Build Mods
    • Liquid Cooling, Numbers, Weights and Flow
    • Cooling
      • Solving Ground Cooling 1
      • Solving Ground Cooling 2
      • Solving Ground Cooling 3
      • Solving Ground Cooling 4
      • Solving Ground Cooling 5
      • Solving Ground Cooling 6
      • Solving Ground Cooling7 โ€“ Test Data
      • Solving Ground Cooling 8 โ€“ Flap Building
      • Solving Ground Cooling 9 โ€“ Hinges
      • Solving Ground Cooling 10 โ€“ Lower Flaps
      • Solving Ground Cooling 11 โ€“ Upper Flaps
      • Solving Ground Cooling 12 โ€“ Completed
      • Cooling the Beast 1
      • Cooling the Beast 2 โ€“ Lower Cowl Expansion
      • Cooling the Beast 3 โ€“ KW Oil Cooler Diffuser
    • EVS (Enhanced Vision System)
    • Cowl Keeper
    • Rudder Gust Locks
    • Wing Fences
    • Post Cure
    • Hinge Upgrade
    • RAM Air & Hellhole Cover
    • Main Gear Beef Up
    • Pilot Side Windows
    • Baggage Pods
    • Winglet Intersection Fairings
    • Titanium Rollover
    • Nose Gear Doors
    • Wheel Pants/Gear Leg Fairing
    • Cabin heating System
    • Fuel System
    • Roll and Pitch Trim
    • Oxygen System
    • The Ferry Tank
    • Cruise Angle Indicator
    • Fire Extinguisher Install
  • Round the World
    • RTW Route East #12 rev1
    • Survival Equipment
    • Training Flights
  • Other Stuff
    • Blog
    • Around the World: RAAUS Sport Pilot Issue 110
    • Taxi Tests
    • Summary Feb โ€™24 from an SAAA Meeting
    • AOPA Pilot 27th Sept 2019
    • Build Tests
    • Flying Stories
      • A Long Easy Dream โ€™06
      • Townsville โ€™07
      • Cairns โ€™08
      • Albany โ€™08
      • East Coast โ€™08
      • Brisbane โ€™09
      • Cairns โ€™10
      • Perth โ€™10
    • Non Build Mods
      • F16 Scoop for JZE
      • Ram Air Box for JZE
      • Strange Tips
    • Milestones
    • Links
  • Contact

Blog

Home
Blog
Moving to the Paint Shop

Moving to the Paint Shop

4 years ago
Dave Berenholtz
Blog, Ch 25 Finishing
Date:  05-21-2021
Number of Hours:  1
Manual Reference:  25

My Long-EZ, VH-XEZ, today escaped the hangar for a trip to the paint booth.

She was happy to get some fresh air after years indoors.

Still missing an engine it was not going to be a long trip.

No great heights were achieved. No contact required with the tower.

It was a bit of a taxi around some hangars. Better than nothing.

We found the paint booth without too much trouble. Iโ€™m grateful for the generosity of the person who has allowed me in there for the work. It is hugely appreciated. No names here, butโ€ฆ thank-you.

Then it was a lot of walking to get the loose items in the new shed. Despite some help I did get my 10,000 steps in that day.

A flashback from six years ago, 12_6_15 when I first visited the airfield with my build to fit the spar and wings.

One day I will taxi past that sock to the holding point on Golf two and then line up on 17 Right for departure.

Previous Post
Final Paint Prep Tasks
Next Post
Primer

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.

CategoryLogsHours
All157617079
Uncategorized135
Ch 3 Education220
Ch 4 Fuselage Bulkheads25231
Ch 5 Fuselage Sides32283
Ch 6 Fuselage Assembly30270
Ch 7 Fuselage Exterior14140
Ch 8 Roll Over/Seat Belts990
Ch 9 Main Gear/Landing Brake71642
Ch 10 Canard28287
Ch 11 Elevators36298
Ch 12 Canard Installation12102
Ch 13 Nose and Nose Gear1291097
Ch 14 CenterSection Spar57525
Ch 15 Firewall and Accessories448
Ch 16 Control System27237
Ch 17 Roll/Pitch Trim System654
Ch 18 Canopy70502
Ch 19 Wings, Alierons1271090
Ch 20 Winglets/Rudders71528
Ch 21 Strakes - Fuel/Baggage65437
Ch 22 Electrical System591031
Ch 23 Engine Installation961152
Ch 24 Covers/Fairings/Consoles25202
Ch 25 Finishing561084
Ch 26 Upholstry340
Fuel System46310
Rollover1050
Cabin heating System60331
The Ferry Tank335
Blog2694182
Build Mods2252513
Nose Gear Doors856
Wheel Pants/Gear Leg Fairing40473
Oxygen System762
Roll and Pitch Trim964
Winglet Intersection Fairings445
Baggage Pods11104
Pilot Side Windows437
RAM Air & Hellhole Cover15177
Main Gear Beef Up322
Post Cure124
Fire Extinguisher16
Wing Fences13
EVS (Enhanced Visual System)130
Hinge Upgrade115
Cowl Keeper110
Rudder Gust Locks19
Cooling20607
Taxi Tests42
Flying10

Complete the Test Flight Program

47Days

Round Australia in Four Flights

322Days

Round the World Departure

465Days

Rough River Flyin, Sept 23, 2026

497Days

ยฉ Copyright 2025 Dave Berenholtz