Now for lots of little details. Pic 1 shows that I’m setting up the heater box and have found the extension to operate my Andair on/off main fuel valve is too close to the box. See the purple rod almost touching the box?

Everything is tight here so that I retain the maximum possible space for the passenger.

This was an easy fix.I lopped off the corner then later floxed on the flat piece of glass you see in pic 2 and then a tidy up.

Oh you might notice I now have a pipe inlet opposite where the eyeball hole is on the back seat. This was about three cure cycles over a day or so. I had to make the glass shape from my pipe form, clean it up, flox it in place, clean up. You know the routine, right?

Too close

Lop off the corner

Glassed and sealed